Ordering custom shirts sounds straightforward until the box arrives and nothing looks right. The logo is pixelated, the color bled into the fabric, or half the batch is the wrong size placement. It happens constantly. People planning shirts for a business, event, or team assume the print shop handles everything, but a big chunk of what goes wrong starts before the file even gets submitted. If you're looking into T-Shirt Printing in Glendora CA, knowing these mistakes upfront will save you a reprint, a missed deadline, and a pretty frustrating conversation with whoever was expecting the shirts.
Submitting Bad Artwork Files
This is the most common problem. By a lot. People pull a logo off their website, which is usually a low-resolution JPEG sized for a screen, and send that in as their print file. On a monitor it looks fine. Stretched across a chest print at 12 inches wide, it looks like a blurry mess. Print shops need files at 300 DPI or higher, typically in vector formats like AI, EPS, or a high-res PDF that can scale without breaking apart.
PNG files can work if they're large enough, but most people don't know what size "large enough" actually means for printing. If your file is 400 pixels wide and you want it printed at 10 inches, that's only 40 DPI. Way too low. Ask your printer what they need before you finalize anything. Getting this wrong means either a garbage print or a redesign fee you weren't expecting.
Picking the Wrong Print Method for Your Order
There are a few main printing methods out there, and they're not all good for the same things. Screen printing works great for big orders with simple, limited colors. DTG (direct-to-garment) printing handles full-color photos and small runs well. Vinyl heat transfer is solid for single names or numbers on jerseys. Each one has a cost structure and a visual result that fits certain jobs and really doesn't fit others.
Where people burn money is by choosing based on price alone without thinking about the design. Screen printing has setup costs per color, so a 10-shirt order with a 6-color design will cost way more per shirt than you'd expect. DTG on dark fabric can look dull without a proper pre-treatment step. Vinyl cracks if it's layered too thick. Understanding how different garment materials and printing processes interact can save you from picking the cheapest option that ends up looking the cheapest too.
Talk to your printer about the specifics of your design and your order size before locking in a method. That conversation is free. Reprinting 50 shirts because the method was wrong isn't.
Ignoring Fabric and Color Compatibility
Not all shirts take ink the same way. Cotton, polyester, and blends each behave differently with heat and ink. Polyester tends to repel water-based inks and can cause dye migration, where the shirt's own color bleeds up into a light-colored print. It's especially bad with red or dark polyester shirts. You end up with a print that looks fine on day one and pink on day five.
The shirt color matters too, and not just aesthetically. Printing a white or light design on a dark shirt requires an underbase layer, which adds cost and changes how the final colors look. Skipping that step to save money usually means a design that fades or becomes transparent after a couple of washes. Always ask what underbase process your printer uses for dark garments, and don't just assume it's included.
Skipping the Proof and Sample Run
Some people skip the proof because they're in a hurry. That's understandable. But ordering 200 shirts without approving a physical or digital proof is genuinely risky. A proof shows you exactly how the final product will look, including color shifts, placement, and sizing. A digital proof catches big problems. A physical sample catches everything else.
One thing people miss is that colors on a screen aren't the same as colors in ink. What looks like a deep navy on your monitor might print as almost black. What looks like bright orange might come out more burnt. HGFX Inc. is one option people use for this kind of work in the area, and like any good shop, they'd rather walk you through a proof than deal with a disappointed customer after the fact. Seriously, just do the proof. It's not extra. It's protection.
Misjudging How Many Shirts You Actually Need
Quantity matters for two opposite reasons. Order too few and you'll pay a much higher per-unit cost, and you'll probably run short anyway. Order too many and you're stuck with inventory that costs money to store or just gets tossed. Neither one is great.
Screen printing in particular has price breaks at specific quantities, often at 12, 24, 48, and 100 shirts. Going from 22 shirts to 24 can sometimes drop your total cost noticeably. It's worth doing the math before you finalize. For events, a general rule is to add 10 to 15 percent on top of your expected count. People lose shirts, sizes run off, and you almost never sell or distribute the exact number you planned.
Also, Custom T-Shirt Printing in Glendora CA tends to have minimum order requirements depending on the print method, so check that early. Showing up expecting 6 DTG shirts with a screen print setup isn't going to go smoothly.
Getting Placement and Sizing Wrong Across Different Shirt Sizes
Here's something that catches a lot of people off guard. A design that looks perfectly sized on a large shirt can look enormous on a small or youth size. And a logo that seems nicely centered on an adult medium might float awkwardly high or low on a 3XL. Most people set up one design and apply it to every size in the order without adjusting placement at all.
Standard chest print placement is usually around 3 to 4 inches below the collar. Left chest logos are typically 3 to 4 inches wide. Back prints sit a couple of inches below the collar seam. These are starting points, not rules, but drifting far from them makes shirts look like they were put together carelessly. If your order spans a big size range, ask your printer whether placement scales automatically or if you need to specify adjustments per size.
For T-Shirt Printing in Glendora CA specifically, local shops can often show you a size chart or printed mock-up across different sizes so you can see the issue before it's baked into 100 shirts. That kind of check takes maybe 10 minutes and catches problems that would otherwise cost you the entire order.
Frequently Asked Questions
What file format should I send to a custom shirt printer?
Vector files are best, usually AI, EPS, or PDF. If you're sending a raster file like PNG or JPEG, it needs to be at least 300 DPI at the actual print size. Files pulled from websites are almost always too low-resolution for printing.
How do I know which print method to use for my order?
It depends on your design complexity, order quantity, and fabric type. Screen printing suits large orders with simple designs. DTG works for small runs with lots of colors or photo-style artwork. Vinyl is best for names, numbers, and simple single-layer applications. Your printer can help you decide once they see the design and know the quantity.
Why did my print crack or fade after just a few washes?
Usually it comes down to one of three things: a cheap ink or low-quality garment, no underbase on a dark shirt, or the wrong print method for the fabric. Polyester blends are especially tricky. Always ask about fabric compatibility before choosing a shirt style, and follow the care instructions on the garment tag after printing.
Is a proof really necessary for a small order?
Honestly, yes. Even for a small order. A proof catches color shifts, sizing issues, and placement problems before they're permanent. Digital proofs are usually free and take a day or less to turn around. Skipping one to save time is rarely worth it if something comes out wrong.
How far in advance should I place a custom shirt order?
For Custom T-Shirt Printing in Glendora CA or anywhere else, two to three weeks is a safe window for most standard orders. If your order is large, needs samples, or involves multiple print locations on the shirt, give yourself closer to four weeks. Rush orders are possible but usually cost more, and they leave less room to catch mistakes before the deadline hits.